HG-P409 RC PICKUP CRAWLER (SWINUB)

HG-P409 RC PICKUP CRAWLER (SWINUB)

Regular price $400.00 Sale price$265.99 Save $134.01
/

  • In stock, ready to ship
  • Inventory on the way

Product name

HG-P409 RC PICKUP CRAWLER (SWINUB)
Product size 52*22*28CM
Playing Time About 30 Mins
Charge Time About 4 Hours
Packing size 56.8*30*36.5CM
CTN size 58.7*31.8*39.5CM
G.W/N.W 6.2/5 KG
Package COLOR  BOX
QTY/CTN 1 PCS
Main functions 
1. 7.4V 1500mAh 15C high-rate lithium battery. (optional)
2. 2.4G four-channel full-scale synchronous remote control system
3. 6kg digital plastic gear waterproof steering gear.
4. Full-vehicle enclosed plastic gear dust-proof transmission mid-wave box
5. 160A ESC can be switched with brake/no brake function
6. Variable stroke universal metal shaft transmission system
7. The portal bridge suspension system adopts a differential speed reduction transmission structure with bevel gears inside
8. The front and rear axle differentials can be equipped with manual differential lock function
9. Suspension of large load damping sheet (spring sheet can be added or subtracted at will)
10. Comes with four large stroke dampers
11. Any platform modification can upgrade the lighting combination and simulation sound combination
12. The 3-speed transmission ratio of the central transmission can be switched at will (LOW GEAR 1:64.39 2ND GEAR 1:35.20 TOP GEAR 1:21.14)
13. The steering angle percentage and gear percentage are adjustable
14. The forward and reverse switching of the throttle has been turned forward and reverse switching
15. On the basis of any drive platform, it can be upgraded to realize 4 kinds of all-wheel steering mode switching:
HG-P409-White-1 1/10 2.4G Four-wheel Drive Pickup Truck Chinese toy DIY RC Simulation Crawler Car
A. Independent steering of the front wheels
B. Four-wheel synchronous steering in different directions
C. Four-wheel synchronous steering in the same direction
D. Independent steering of rear wheels

Packing List:

Operation manual *1
Nylon cable tie 3*150mm *6
P409 car shell sticker *1
1.5mm Allen key *1
2.0mm Allen key *1
2.5mm Allen key *1
Cross wrench (small) *1
Open-end wrench (small) *1
Hex wrench *1
M3*4 drill screw *1
Flange nylon locknut (M4) *2
Sponge double-sided stickers *1
Bolt screw (Φ2.5*11mm*M3) *2

Mechanical part

1: Charging protection: protection function for battery overcharge and overdischarge.
2: Low voltage protection: The receiver protects when the battery is low.
3: High temperature protection: When the receiver's operating temperature is higher than the setting, the receiver will protect the drive control circuit; it will resume work after the temperature is normal.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed